XK7136(Semi-protection)
Product Name: CNC Milling MachineMain properties and characteristics of body castings1. All adopt high-quality resin sand wear-resistant castings, strong and tough tendons and bones, super-large columns, wide and low seat, honeycomb structure. After two annealing treatments and vibration aging, the stress removal ensures long-term deformation.
2. Adopt the first three-dimensional variable diameter design in China to ensure the stability and reliability of the body.
3. Three axes adopt rectangular guide rail with strong steel character, which can bear heavy cutting, precision grinding of worktable, all non-sliding surfaces of guide rail are quenched by ultra-high frequency, which greatly enhances the surface hardness; the sliding surface of guide rail used is embedded with imported soft belt of guide rail, which greatly increases the wear resistance of guide rail and improves the service life of machine tool.
4. The three-axis transmission adopts high precision and rigid ball screw pairs, and installs the special bearing of Japanese NSK ball screw with high precision, which ensures the positioning accuracy and repetitive positioning accuracy.
5. All three axes adopt domestic absolute value servo motors and spindle motors, which provide strong power and ensure the feed accuracy under strong load-bearing capacity.
6. The three axes are directly connected, and high precision coupling is used to ensure the transmission capacity of each axle.
7. Adopting the high rigidity and high precision spindle of the international well-known Taiwanese brand, the spindle has the advantages of high reliability, long service life, low noise, small vibration and high precision.
8. Sealed machine tool guideway shield is used for each axis to effectively protect the guideway and screw and prolong its service life.
9. High-efficiency double-automatic lubrication system: the guide lubrication uses volume distributor with oil injection, which can supply the required oil quantitatively, reduce the waste of lubricating oil and avoid environmental pollution.
10. The wiring in the electric cabinet conforms to the national electrical safety standards, and ensures that the control system is not disturbed by external interference. By using heat exchanger, the hot air in the electric box can be expelled rapidly, and the constant temperature in the box can be maintained, so that the control system can run steadily for a long time.
11. High-precision pitch compensation, high-precision laser measuring instrument is used to compensate each transmission shaft to make the positioning accuracy of each axis more accurate, more suitable for processing high-precision parts and die manufacturing.
- External protection adopts three-dimensional semi-protection, all materials are 2mm standard steel plate, which ensures the safety of machine tools.
Note: If you need to configure the tool library, please specify it separately. Parameters
| | Model | |
| | X | 900 |
| Stroke | Y | 400 |
| Z | 500 |
Workbench | Dimension | 1250x360 |
| Maximum Bearing Capacity | 400 |
| T-groove (quantity-groove width) | 3x18 |
| Spindle | Spindle motor power | 5.5KW |
| Distance from end of spindle to worktable | 100-600 |
| Distance from the center of the spindle to the guide surface of the column | 460 |
| Spindle speed range | 6000(or 8000) |
| Conical hole type | BT40 |
| Speed | High | 10000/10000/8000mm |
| Feed | 1-6000 |
| Servo Motor Power (Torque) | X / Y | 7.7 |
| Z | 10(with brake) |
| Accuracy | X Y Z | ±0.01 |
| Repetitive accuracy | X Y Z | ±0.008 |
| General | Dimension | 2220×1850×2350 |
| Weight | 2800 |
| Air Pressure Request | 0.6 |
| Other | Power requirements | 380V±10% 50Hz |
| No. | Name | Number |
| 1 | Fully closed shield and X/Y/Z axle telescopic shield | 1 |
| 2 | Automatic centralized lubrication system | 1 |
| 3 | Coolant unit | 1 |
| 4 | Working lamp | 1 |
| 5 | Transformer | 1 |
| 6 | Machine Tool Pad Iron | 1 |
| 7 | Electrical cabinet support | 1 |
| 8 | Air gun | 1 |
| 9 | CNC System | 1 |
| 10 | RS232 | 1 |
a. Temperature
Operating Temperature: Normal Temperature 20 + 20 C
Storage and handling: - 30 ~50 C
Maximum change ratio: within 10 C/h
b. Humidity
Continuous: 70% or less (no condensation) for a short time: 95% or less (no condensation)
c. Installation Site Conditions
1. Not affected by external vibration
2. Not affected by corrosive gases
3. Avoid direct sunlight machine tools
4. Avoid direct contact with external wind, air and cold and hot air for temperature adjustment.
5. Avoid installing heating and other heat sources near machine tools
6. Reduce dust (avoid casting, welding, sheet metal workshop, etc.)
7. Avoid leaking and soaking
d, power supply: 3-phase 380V + 10%; 50Hz + 1Hz
Installation, Acceptance and Training1. Installation and commissioning shall be carried out from the commissioning personnel of our company to the factory where the buyer is located.
2. The buyer shall notify the seller of the installation and commissioning of the equipment within 10 days after the arrival of the equipment.
3. After the equipment arrives at the factory, the buyer shall be responsible for:
A. Choose the installation location of machine tools, lay a good foundation and put the equipment in place.
B. Operators learn the technical data of machine tools in advance
C. Workpieces, Tools and Fixtures for Ready Processing
4. Seller's personnel shall carry special tools for installation and commissioning, and other tools and pick-ups shall be provided by Buyer.
5. Acceptance
A. Inspection of main machine tool accessories
B. Inspection of equipment operation
C. Acceptance and acceptance of machine tool accuracy, our company provides factory accuracy checklist for acceptance and acceptance, the buyer is responsible for the required checking tools and measuring tools.
TrainingA. If the buyer needs to train in the factory, he can send the learners to study in our company, or he can send the debuggers from our company to the factory where the buyer is located for the training of machine tool operation and maintenance at the same time of installation and debugging.
B. The buyer's programming training personnel should have a certain cultural foundation of technical personnel, participate in operation and maintenance training personnel and have a certain level of common machine tool operation skills.
9,Warranty period and after-sales service
1. Warranty Period: The machine tool's warranty period is 12 months from the date of equipment leaving the factory.
During the warranty period, the company is responsible for free maintenance of machine tools due to product quality problems.
Subordinate conditions are within the warranty period, but not applicable. Users must pay all maintenance costs.
A. When machine tools are damaged by earthquakes, typhoons, floods or disasters beyond human resistance.
B. Failure, rust or damage caused by improper operation and maintenance of the buyer.
After the warranty period, the seller is responsible for guaranteeing the compensated supply of spare parts, technical consultation for maintenance and repairs to the compensated person. The seller charges the fee for replacing the faulty parts at a preferential price and provides spare parts.
2. After-sales service
If the machine tool fails, the company's after-sales service personnel will arrive at the user's site within 48 hours (24 hours in our province) to troubleshoot the machine tool. After completion, the user fills in the "feedback sheet" of quality problems, and fails to repair the same part three times. The seller shall unconditionally replace the new part for the buyer.
Description: Due to the different configuration, special order, CNC system and the continuous improvement of products, some technical parameters will be affected. Please check the actual situation when ordering. Understanding the inconvenience.
Contact US
